NAISH X ARMSTRONG - BEGINNER PACK WINGFOIL
The perfect package to get you started ! Naish Hover Ascend 2025 board + foil kit Armstrong S1
Filter By
Categories
Categories
Brand
Brand
The perfect package to get you started ! Naish Hover Ascend 2025 board + foil kit Armstrong S1
The perfect package to get you started ! Naish Hover Ascend 2025 board + foil kit NORTH PRIME EDITION
CONTACT US FOR SHIPPING ARRANGEMENTS
5'4'' x 20'' - 55L *contact us to order 5'6'' x 21.25'' - 70L 5'8'' x 22'' - 85L 5'10 x 22.75'' -100L 6'0'' x 23.5'' -115L
DESIGN COLLAB - DAMIN GIRARDIN + RALF GROESEL PRODUCED BY BRAINCHILD APPROVED BY KEVIN LANGEREE
The perfect package to get you started ! Naish Hover Ascend 2025 board + foil kit Taaroa AO
There are 126 products.
2X M8X30 AND 1 X M8X35 FLAT HEAD SCREWS HEX
2 x TITANIUM flat head screws m6x35 1 x TITANIUM flat head screws m6x30
Hardware Kit to connect your Plate to the Rail Board (Kraken Modular System)
Sacrificial Anodes Replacement Kit for Kraken Modular System Fuselages and Masts
QUICK MOUNTING KIT
Hardware Kit Inox Bar for Anode and Screws
Hardware Kit Washers for M6 Screws Washers for M6 screws
Sold Individually
2 X SOCKET HEAD CAP SCREWS M6X20 AND WASHERS
Protective Rail Tape
Sold individually
Replacement Brass Plate for Quick Release System (Q01K)
Titanium Quick Release System Titanium Quick Release System for Kraken Masts Kraken Modular System - PATENTED
(SET of 2)These self-tapping titanium plated torx screws and titanium hex washers are designed to fasten your V-strap or straight footstraps. Titanium plating provides extra wear resistance and the oil slick appearance stands out. 27mm screw length is compatible with Wing FG boards or older Armstrong wing and surf boards. NOT COMPATIBLE WITH WKT BOARDS...
Hardware Kit Alu Plate (P02K) to Rail Board
Hardware Kit Carbon Plate to Rail Board
Spare Titanium Pin and Shims for Q02K
Hardware Kit WL950/WL1150/WL1350/WL1550/WL1750/WM999
One Size
Shimming your mast under the leading edge will trim the board nose up and help enable you to regain a more comfortable stance and control over the board at higher speeds. Shimming the mast under the trailing edge will trim the board nose-down at lower speeds (e.g., pump, dockstart, or downwind), helping the foil to engage foil sooner. NOTE: North boards...
3m x 40mm
Hardware Kit Deep Tuttle (T04K) to Mast
By popular demand, we bring you Torx Hammer, a 100% Blue Titanium Multi Tool with T30 and T40 bits as well as a 1/4" Bit driver. With an extended 64mm lever, you can get more torque for tightening and loosening your hardware. The 100% GR5 Blue Titanium is corrosion free, light, and easy to use. Never miss a session with a loose hydrofoil screw for lack...
Screws M8 x 35mm T40 (same as Pack G) Sold individually
MA059 For WL 1550