APPLETREE - APPLESLICE V3 WING FOIL BOARD

Narrow and longer! Plus better low wind performance. The optimised rocker ensures super easy touch downs and early planning. We keep this “long and narrow” theme  in the whole size range. So also with the bigger sized Slice’s, you can carve hard. Now also bigger riders can experience the same performance as lighter riders due to the finely tuned dimensions of each board in the size range.

This new version of the Appleslice draws inspiration from the faster Skipper downwind and wing models Appletree makes. These shapes are longer with a smoother bottom contour to help water flow more efficiently so the board reaches top speed quicker. 

The bottom starts with a displacement hull design which forces the water to the sides. It helps the board come to the surface quicker in the low volume sinker sizes. After the displacement hull the bottom flows into a flatter middle section, which makes the Appleslice V3 much more stable than the Skipper boards. 

We pulled up the hard rail edge much further up towards the nose which helps with water release and taking off in lighter winds. When you hit the wave with the rail of the board the Appleslice V3 hardly slows down. To further help with wave performance, the tail of the V3 is quite a bit narrower than the previous version, this helps with the ability to turn in waves. 

The top rail has a small radius which gives it a nice wide platform on the deck, also this harder rail makes the board easier to grab.